"ams Osram has announced a series of 2835 (2.8×3.5-mm) LEDs under the Osconiq brand including an emitter that uses quantum dot (QD) technology to more efficiently deliver excellent color rendering and warm CCTs. The new series further includes an LED with a cyan peak intended for lighting for health and wellbeing or circadian lighting applications. An 80-CRI mem2ber of the family for commercial and industrial (C&I) lighting applications completes the new series."
"The 2835 opportunity has certainly caught the attention of LED manufacturers. Lumileds just announced higher-performing 2835 LEDs a few weeks ago and that was after a similar performance push in February. Osram has previously offered 2835 LED in its Duris family of LEDs that target mainstream, specification-grade lighting products. The Osconiq family generally targets architectural, professional-grade luminaires."
"The three LEDs in the Osconiq E 2835 series cover a breadth of potential deployments in the C&I and adjacent application spaces. The standard Osconiq E 2835 CRI 80 is a component that can serve in mainstream C&I applications and that would allow a luminaire manufacturer to offer a product line with luminaires varying in color quality that all use LEDs from the same family. The company said the 80-CRI component might be used in office and retail applications".
"The most significant member of the new series is perhaps the Osconiq E 2835 CRI 90 QD component. The use of QDs in the phosphor formulation provides a sharper cutoff of red energy outside the human visual range and therefore a more efficient LED at warm CCTs with excellent color rendering. The then-Osram Opto Semiconductors business unit announced commercial availability of the first QD-enabled LED for general lighting back in the summer of 2019."
"ams Osram said the 2835 QD LED offers the expected evolutionary efficacy improvements from the 3030, but largely uses the same technology platform. The company said efficacy would exceed 200 lm/W even at warm CCTs and 90 CRI. The LED will be offered over the range of 2200K to 6500K CCT.
The color quality is, of course, important for the intended applications, including high-end retail and hospitality, but it will also enable luminaire makers to meet the Single Lighting Regulation (SLR) policy on light source efficacy that the European Union is mandating by September 2021. The prescribed efficacy levels apply to 90-CRI LEDs and also require LEDs to offer R9 (saturated red) rendering at levels of 50 or better. The QD technology will play a big role in that new policy."
"The QD performance could soon be pushed further. For now, RoHS regulations on hazardous substances limit the cadmium presence to a maximum of 100 ppm (parts per million) in the phosphor formulation, and thus far cadmium-free QD technology remains elusive for general illumination deployment. But ams Osram said lighting applications where the QDs are sealed and protected such as in its phosphor formulation may get exemptions from the cadmium limits by the end of this year."
"ams Osram said the 2835 QD LED offers the expected evolutionary efficacy improvements from the 3030, but largely uses the same technology platform. The company said efficacy would exceed 200 lm/W even at warm CCTs and 90 CRI. The LED will be offered over the range of 2200K to 6500K CCT."
"The color quality is, of course, important for the intended applications, including high-end retail and hospitality, but it will also enable luminaire makers to meet the Single Lighting Regulation (SLR) policy on light source efficacy that the European Union is mandating by September 2021. The prescribed efficacy levels apply to 90-CRI LEDs and also require LEDs to offer R9 (saturated red) rendering at levels of 50 or better. The QD technology will play a big role in that new policy."
"The QD performance could soon be pushed further. For now, RoHS regulations on hazardous substances limit the cadmium presence to a maximum of 100 ppm (parts per million) in the phosphor formulation, and thus far cadmium-free QD technology remains elusive for general illumination deployment. But ams Osram said lighting applications where the QDs are sealed and protected such as in its phosphor formulation may get exemptions from the cadmium limits by the end of this year."
"The final member of the new E 2835 family is the Osconiq E 2835 Cyan, and that LED squarely targets lighting for health and wellbeing applications. The LED is not QD-based. Rather, the LED appears to be based on a pair of blue pumps with the more powerful one operating in the cyan region centered at about 480 nm, while the traditional blue pump down at the 450-nm wavelength produces a relatively lesser energy peak."
"Now ams Osram will have a similar tool for luminaire makers that want to offer products that can improve circadian health. The 480-nm peak would be utilized in the morning to boost alertness and ultimately to improve sleep patterns. And the cyan LED could be combined with the QD in a two-channel system that also could deliver a warm red-centric SPD later in the day and before bedtime."
Comments